Skip to Content
  1. All Products
  2. Screw Fittings
  3. Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3

https://www.boni-shop.co.uk/web/image/product.template/39737/image_1920?unique=bad6194

£ 13.71 13.71 GBP £ 13.71 Tax Included

14.99 € Tax Included

Not Available For Sale

(£ 0.00 / Units)
Tax Included, Delivery Not Included

This combination does not exist.

Contact Us
SKU: BONI-S72TA320632K
Brand: Boni-Shop®

Terms and Conditions
Delivery: Ready to ship within 24 hours!

Screw Fitting T-Piece 2 x 3 - 1" Male Thread - 32 x 3 made-in-germany

Screw fittings for easy and quick installation without pressing tool

Advantages:

  • Economic alternative to conventional press systems
  • All materials are safe for use in drinking water and comply with the UBA positive list
  • Two O-rings prevent the ingress of air oxygen

Properties:

dgvw   DVGW DW-8501CP0053

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-3   Continuous load capacity: 10 bar / 70° C / 50 years

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-4   Maximum operating temperature 95° C

Application areas:

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-5   Drinking water installations

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-6   Surface / ceiling heating

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-7   Surface / ceiling cooling

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-8   Radiator connection

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-9   Oil-free compressed air up to 10 bar

Certifications:

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-10   DVGW

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-11   IMA

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-12   EN ISO 21003

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-13   GOST

Screw Fitting T-Piece 32 x 3 - 1" Male Thread - 32 x 3-14   Hygiene Certificate

For a quick and secure pipe connection, you only need screw fittings, our multilayer pipe, a pipe cutter, and a calibrator.
For better understanding, we have provided a pictorial installation guide with the photos.

Installation guide:

  • Cut the pipe to length with a suitable tool
  • After cutting to length, the pipe end must be calibrated and deburred with a calibrator
  • Position the union nut and clamping ring on the pipe as shown in the illustration. Then fully insert the nipple of the base body into the pipe. Push the clamping ring and union nut onto the fitting base body until they stop. The union nut can now be hand-tightened. 
  • The union nut must be tightened with a suitable tool until the appropriate resistance is reached.
    Check the connection afterwards.

Please note that using other multilayer pipes than those distributed by Boni-Shop is at your own risk.
A compliant connection exists with all press systems only with system-approved components (fittings and pipes that have been tested together)
This applies to all multilayer pipe systems regardless of the manufacturer.

EU-Responsible Name:
EU-Responsible Street:
EU-Responsible House No:
EU-Responsible Post Code:
EU-Responsible Town: #N/A
EU-Responsible Country:
EU-Responsible Email:
EU-Responsible Phone Number:
Also buy with this product: