Press fitting wall penetration 20 x 2 - 1/2" female thread

FEATURES AND BENEFITS

Press fitting with DVGW and KIWA certification

Made in Germany

• Suitable for drinking water without restrictions (DVGW DW-8501BS5049)
• Complies with the UBA positive list
• Durability: 10 bar / 70° C / 50 years
• Maximum operating temperature: 95° C
• Leaky when not pressed
• New modern contour – flow-optimized – free passage – virtually no flow noise
• Best ZETA values: largest passage area = largest inner diameter
• Low lead or lead-free: all components are DVGW certified, comply with the UBA positive list, and meet the requirements of the Drinking Water Ordinance
• A fitting system for two pipe systems: multilayer composite and copper pipes DVGW certified
• No pushing out of the pipe before the pressing process and through the guide ring; fits precisely in the press jaw, cavity-free connection = highest safety
• 2 O-rings due to cavity-free pressing = no penetration of air oxygen
• Composite pipe system press fitting made of special brass (CU Zn 40 Pb2)
• Press sleeve made of stainless steel
• Plastic guide ring (black) for secure pressing even in forced positions
• Integrated control window "insertion depth" pipe in fitting in the stainless steel sleeve = safety plus for the user
• Made in Germany

For a quick and secure pipe connection, you only need press fittings, our aluminum composite pipe, a pipe cutter, a calibrator, and a suitable press tool with TH press contour.
For better understanding, we have provided a pictorial assembly instruction with the photos.

---

Assembly instructions:

• Cut the pipe to length with a suitable tool
• After cutting, the pipe end must be calibrated and deburred with a calibrator
• Then insert the pipe into the fitting up to the stop. The correct insertion depth can be recognized by the three control windows of the stainless steel press sleeve.
• Press with a suitable pressing tool and a dimensionally compliant press jaw depending on the fitting size.

---

Please note that the use of other composite pipes than those distributed by Boni-Shop is at your own risk.
A compliant connection exists in all press systems only with system-approved components (fittings and pipes that have been tested together)
This applies regardless of the manufacturer for all composite pipe systems.