Press fitting Cistern Connection 16 x 2 - 1/2"

FEATURES AND BENEFITS

Press fitting with DVGW and KIWA certification

Made in Germany

• Suitable for drinking water without restrictions (DVGW DW-8501BS5049)
• Complies with the UBA positive list
• Durability: 10 bar / 70° C / 50 years
• Maximum operating temperature: 95° C
• Leaky when not pressed
• New modern contour - flow-optimized - free passage - virtually no flow noise
• best ZETA values: largest passage area = largest inner diameter
• low lead or lead-free: all components are DVGW-certified, comply with the UBA positive list and meet the requirements of the drinking water ordinance
• a fitting system for two pipe systems: multilayer composite and copper pipes DVGW-certified
• no pushing out of the pipe before the pressing process and through the guide ring; fits precisely in the pressing jaw, cavity-free connection = highest safety
• 2 O-rings due to cavity-free pressing = no penetration of air oxygen
• Composite pipe system press fitting made of special brass (CU Zn 40 Pb2)
• Press sleeve made of stainless steel
• Plastic guide ring (black) for secure pressing even in forced positions
• Integrated inspection window insertion depth pipe in fitting in the stainless steel sleeve = safety plus for the user
• Made in Germany

• Cut the pipe to length with a suitable tool
• After cutting, the pipe end must be calibrated and deburred with a calibrator
• Then insert the pipe into the fitting up to the stop. The correct insertion depth can be seen through the three inspection windows of the stainless steel press sleeve.
• Press with a suitable pressing tool and a dimensionally compliant pressing jaw depending on the fitting size.

Please note that the use of other composite pipes than those distributed by Boni-Shop is at your own risk.
A compliant connection exists in all press systems only with system-approved components (fittings and pipes that have been tested together)
This applies manufacturer-independently to all composite pipe systems.