PPSU Pressfitting Tee 32 x 3

ADVANTAGES

• 100% lead-free, due to high-performance plastic PPSU (polyphenylsulfone)
• All materials are safe for use in drinking water and comply with the UBA positive list
• Lightweight and highly resistant fitting, unbreakable and durable
• Very good resistance coefficient (Zeta) for lower pressure loss
• Free passage, almost no flow noise
• Innovative, flow-optimized press contour TH
• Two O-rings for optimal safety
• Stable plastic guide ring for secure pressing even in constrained positions
• Three inspection windows in the stainless steel sleeve to check the insertion depth
• The system's forced leakage ensures that unpressed connections can already be located during the pressure test

FEATURES

• DVGW certified (DW-8501BS5049)
• Durability: 10 bar / 70° C / 50 years
• Maximum operating temperature: 95° C
• TH press contour
• Unpressed and leaking (dimensions 16-32 mm)
• Individually packed in a bag

Made in Germany.

Installation instructions:

• Cut the pipe with a suitable tool
• After cutting, the pipe end must be calibrated and deburred with a calibrator
• Then insert the pipe into the fitting as far as it will go. The correct insertion depth can be seen through the three inspection windows of the stainless steel press sleeve.
• Press with a suitable pressing tool and a pressing jaw that conforms to the fitting dimensions.

Please note that using multilayer pipes other than those distributed by Boni-Shop is at your own risk.
A compliant connection exists for all press systems only with system-approved components (fittings and pipes that have been tested together)
This applies regardless of the manufacturer for all multilayer pipe systems.