Press pliers including 4 press jaws with TH press contour.
Press jaw size: 16x2, 20x2, 26x3 and 32x3
For a quick and secure pipe connection, you only need press fittings, our aluminum composite pipe, a pipe cutter, a calibrator, and a suitable press pliers with TH press contour.
For better understanding, we have provided a pictorial assembly instruction with the photos.
Assembly instructions:
- Cut the pipe to length with a suitable tool
- After cutting to length, the pipe end must be calibrated and deburred with a calibrator
- Then insert the pipe into the fitting up to the stop. The correct insertion depth can be seen through the three inspection windows of the stainless steel press sleeve.
- Press using suitable pressing tools and a press jaw conforming to the fitting dimensions.
Please note that using composite pipes other than those distributed by Boni-Shop is at your own risk.
A compliant connection exists in all press systems only with system-approved components (fittings and pipes that have been tested together)
This applies regardless of the manufacturer for all composite pipe systems.
EU-Responsible Name:
EU-Responsible Street:
EU-Responsible House No:
EU-Responsible Post Code:
EU-Responsible Town: #N/A
EU-Responsible Country:
EU-Responsible Email:
EU-Responsible Phone Number:
Also buy with this product:
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
