Rain Collector 110 mm /graphite/

Rain Collector  110 mm /graphite
 

Designed for installation in downpipes with 110mm outer diameter in the color graphite
 

The rainwater collector can be installed in both the gutter system currently under construction and existing downpipes. The elements included in the set allow for a quick and easy connection to the tank where rainwater is collected.
 

• The rain collector enables efficient rainwater recovery and storage. 
• It is designed for installation in downpipes and can also be installed retrospectively.
• The installation is simple and can also be carried out by oneself.
• Offered complete with connection and quick connector, which allows the connection of a garden hose and the diversion of rainwater into a container, such as a rain barrel.
• An additional closure plug allows the rain collector outlet to be closed if necessary.
• We recommend installing the rain collector in places not exposed to large amounts of debris (e.g., tree leaves).
• For necessary cleaning, the rain collector should be rinsed several times with pressurized water.

Technical Data:
 

• Material: Polyvinyl chloride (PVC)
• PZH Approval: Yes
• Certificates: ISO 9001: 2015, Conformity certificate with the Polish CZ ITB standard
• The kit includes: Water recuperator, connection, quick connector, end cap
• Vicat softening point: ≥ 75 ° C.
• Tensile strength: ≥42MPa
• Elongation at break: ≥ 100%
• Impact tensile strength: ≥ 500 kJ / m2
• Thermal shrinkage: ≤ 3%
• Color change after aging: No more than 3 gray levels
• Application area: Gutter systems
• Impact resistance: TIR ≤ 10%
• Additional features: The possibility to close the outlet from the recovery tank
• Quick coupling size: 1'
• Possibility to connect a garden hose: Yes
   

Dimensions:

Diameter: 110

Upper inner diameter: 110mm
Lower outer diameter: 104mm
Height: 210mm
Suitable for downpipes with 110mm outer diameter