100 Pull Caps for KLASEBO Tile Leveling System
The Klasebo Tile Leveling System enables easy and precise installation of tiles.
It consists of special thread clips and pull caps that keep the tiles at the same height and ensure perfect alignment.
The leveling system compensates for unevenness in the substrate, creating a flat surface.
This not only facilitates installation but also prevents cracks and gaps between the tiles.
Product Features:
- Practical leveling system for perfectly flat walls and floors
- Thread clips for tiles and slabs with a thickness of 1 mm to 17 mm
- Thread clips available for joint widths of 1 mm, 2 mm, or 3 mm
- The pull caps are reusable
- Easy to use
- No joint crosses necessary
- No protruding tile edges anymore
Application:
Select the appropriate thread clip according to the desired joint width (1, 2, or 3 mm).
After the first tile is laid, the thread clip is pushed under the tile, and the next tile is placed against the clip.
Now the pull caps are screwed onto the protruding thread clips. This simple process brings the slabs to a uniform height.
The pull clips have a predetermined breaking point at the bottom. Once the tile adhesive has hardened, the protruding thread can be easily knocked off with a rubber mallet or stepped on with the foot. The pull clips can be knocked off with or without a cap, although it is easier with a cap. The clips are easiest to remove when knocked off in the direction of the joint. For sensitive natural stone, we recommend knocking off without a cap.
The pull caps can now be collected and reused for the next use.
Calculate Consumption:
How many pull caps and thread clips are needed per installed m²?
With our consumption table, this is very easy to read:
Simply find the number 60 in the vertical column A and the number 40 in the horizontal column (see yellow marking),
and you will see how many clips and caps are needed per installed m².
Remember that the pull caps can be reused. Only the thread clips are a pure consumable item.
If part of the installed area has already hardened, you can reuse the pull caps for the area still to be installed.
Depending on the project, fewer pull caps than thread clips may be needed.
