Angle connectors with and without rib in various sizes

Angle connectors with and without rib in various sizes
 

Material:
 

Steel Quality

S 250 GD +Z 275 according to DIN EN 10346

Corrosion Protection

275 g/m2 on both sides - corresponding to a zinc layer thickness of approx. 20 μm

Advantages:
 

for types WV01 / WV02 / WV03 / WV04 / WV05 / WV06 / WV07 / WV08
 

• Load absorption in all directions
• Optimized load-bearing capacities for full and partial nailing
• Advantageous fastening using bolt anchors on components made of concrete or steel
• Suitable for fastening secondary beams to supports and main beams
   

for type WV09
 

• less weight - thus better handling in storage
• High load values
• European patent applied for
   

for types WV10 / WV11 / WV12

• Light but strong angle connectors

Application:
 

Applicable Materials
 

Support:

• Wood, wood-based materials, concrete, steel

Component to be supported:

• Wood, wood-based materials

Application Area
 

for types WV01 / WV02 / WV03 / WV04 / WV05 / WV06 / WV07 / WV08

• The AB angle connectors without rib are suitable for load-bearing timber constructions, e.g., intersecting beams, as well as connections to supports.
• If greater requirements are placed on the forces to be connected, we recommend the use of angle connectors with rib. The AB angle connectors 70, 90, and 105 without rib are also applicable for fastening wood to other materials using bolts.
   

for type WV09

• Compact wood-wood connections with relatively high load in all directions, e.g., purlins on main beams, trusses, etc.

for types WV10 / WV11 / WV12

• Wood-wood connections

Technical Data:
 

• CE / ETA / DOP Approval

Fastening
 

• Fastening is done with CNA4, 0xl ring nails or CSA5, 0xl screws.
• Bolt anchors are used for fastening to concrete or steel.