Angle connector 89 x 89 x 60 x 1.5 mm with rib

Angle connector 89 x 89 x 60 x 1.5 mm with rib (WV08)

Material:
 

Steel quality:

S 250 GD +Z 275 according to DIN EN 10346

Corrosion protection:

275 g/m2 on both sides - corresponding to a zinc layer thickness of approx. 20 μm

Advantages:
 

• Load absorption in all directions
• Optimized load capacities for full and partial nailing
• Advantageous fastening using bolt anchors on components made of concrete or steel
• Suitable for fastening secondary beams to supports and main beams

Application:
 

Applicable Materials
 

Support:

• Wood, wood-based materials, concrete, steel

Component to be supported:

• Wood, wood-based materials

Application Area
 

• The AB angle connectors without rib are suitable for load-bearing timber constructions, e.g., intersecting beams, as well as connections to supports.
• If greater requirements are placed on the forces to be connected, we recommend using angle connectors with rib. The AB angle connectors 70, 90, and 105 without rib are also applicable for fastening wood to other materials using bolts.

Technical Data:
 

Fastening
 

• The fastening is done with CNA4.0xl ring nails or CSA5.0xl screws.
• Bolt anchors are used for fastening to concrete or steel.