INSUL-TUBE® H PLUS Rubber 2m Pipe Insulation Ø 54 mm x 30 mm Insulation 50% GEG

INSUL-TUBE® H PLUS Rubber 2m Pipe Insulation
Ø 54 mm x 30 mm Insulation 50% GEG

IMPORTANT NOTICE!

To comply with the new GEG regulation, the insulation thicknesses have increased.
However, the designations have remained the same!

For example, choose pipe diameter 18mm and insulation thickness 20mm
you will now receive pipe diameter 18mm and insulation thickness 26mm !

Look at the respective table below to make the right choice.
Under Reference, the common designation is given and under "B" you will find the actual insulation thickness.

Product Description:
Flexible pipe insulation made of closed-cell soft foam based on synthetic rubber, insulation thicknesses according to GEG.

Material:
Soft foam based on synthetic rubber

Application Area:
Heating and sanitary area according to GEG and cold water pipes DIN 1988 200

Length: 2m rods

Color: Gray

Thermal Conductivity:
(EN ISO 8497)
at 10°C:
0.032 W / mK = 6-16 mm
0.035 W / mK = 17-29 mm
0.037 W / mK = 30-45 mm

at 40°C:
0.035 W / mK = 6-16 mm
0.038 W / mK = 17-29 mm
0.040 W / mK = 30-45 mm

at 70°C:
0.038 W / mK = 6-16 mm
0.041 W / mK = 17-29 mm
0.043 W / mK = 30-45 mm

Temperature Range:
up to + 110 °C (EN 14707)

Fire Behavior:
6 - 29 mm = BLs3d0 (EN 13501-1)
30 - 45 mm = CLs3d0 (EN 13501-1)
* = Euroclass E

Insulation Thicknesses:
10, 15-18, 20-24 and 30-54 mm

 

Technical Data:

Insulation Thickness 30 (old) now 31 mm:

Insulation Thickness 30 (old) now 32 mm:

Insulation Thickness 30 (old) now 39 mm:

Insulation Thickness 30 (old) now 38 mm:

50% GEG

• Pipes and fittings in wall and ceiling penetrations, in the crossing area of pipes, at pipe connection points, at central pipe distributors
• Pipes in components, between heated rooms of different users

100% GEG

• Pipes in unheated rooms and in basement rooms
• Pipes in exterior walls as well as in building structures between unheated rooms, in channels and shafts
• Pipes for supplying multiple parties
• Hot water pipes
• Hot water pipes up to a water content of 3 liters, which are neither included in the circulation circuit nor equipped with electric trace heating (branch lines) and are located in heated rooms. (*)

* Although no requirements are set here, insulation must be provided for the following reasons:
Corrosion protection, avoidance of cracking and flow noises, air and structure-borne sound insulation, reduction of heat load. To maintain user comfort, the hot water pipe should be insulated to prevent unnecessary cooling by components, etc.