CLIMAFLEX® naturefoam stable 2m Ø 42 mm x 20 mm Insulation 50% GEG
Product Description:
Flexible pipe insulation made of closed-cell soft foam based on synthetic rubber, insulation thicknesses according to GEG.
Material:
Soft foam based on synthetic rubber
Application Area:
Heating and sanitary area according to GEG and cold water pipes DIN 1988 200
Length: 2m rods
Color: Gray
Thermal Conductivity:
(EN ISO 8497)
at 10°C:
0.032 W / mK = 6-16 mm
0.035 W / mK = 17-29 mm
0.037 W / mK = 30-45 mm
at 40°C:
0.035 W / mK = 6-16 mm
0.038 W / mK = 17-29 mm
0.040 W / mK = 30-45 mm
at 70°C:
0.038 W / mK = 6-16 mm
0.041 W / mK = 17-29 mm
0.043 W / mK = 30-45 mm
Temperature Range:
up to +110 °C (EN 14707)
Fire Behavior:
6 - 29 mm = BLs3d0 (EN 13501-1)
30 - 45 mm = CLs3d0 (EN 13501-1)
* = Euroclass E
Insulation Thicknesses:
13, 20 and 25 mm
Technical Data:
Insulation Thickness 20 mm:
| Copper CU | Steel FE | Plastic MSV & PEX | ||||||||
|
NW DN |
Ø outside mm |
NW DN |
Ø outside mm |
Ø outside inch |
Ø outside mm |
Reference |
A mm |
B mm |
Length m |
GEG |
| 10 | 15 | 8 | 13, 5 | 1/4 | - | 15 x 20 | 15 | 20 | 2 m | - |
| 15 | 18 | 10 | 17, 2 | 3/8 | 16 | 18 x 20 | 18 | 20 | 2 m | - |
| 20 | 22 | 15 | 21, 3 | 1/2 | 20 | 22 x 20 | 22 | 20 | 2 m | - |
| 25 | 28 | 20 | 26, 9 | 3/4 | 25 | 28 x 20 | 28 | 20 | 2 m | 50% CU |
| 32 | 35 | 25 | 33, 7 | 1 | 32 | 35 x 20 | 35 | 20 | 2 m | 50% |
| 40 | 42 | 32 | 42, 4 | 1 1/4 | 40 | 42 x 20 | 42 | 20 | 2 m | 50% FE |
50% GEG
- Pipes and fittings in wall and ceiling penetrations, in the crossing area of pipes, at pipe connection points, at central pipe distributors
- Pipes in components, between heated rooms of different users
100% GEG
- Pipes in unheated rooms and in basement rooms
- Pipes in exterior walls as well as in building structures between unheated rooms, in channels and shafts
- Pipes for supplying multiple parties
- Hot water pipes
- Hot water pipes with a water content of up to 3 liters, which are neither included in the circulation circuit nor equipped with electric trace heating (branch lines) and are located in heated rooms. (*)
* Although no requirements are set here, insulation must be applied for the following reasons:
Corrosion protection, prevention of cracking and flow noises, air and structure-borne sound insulation, reduction of heat load. To maintain user comfort, the hot water pipe should be insulated to prevent unnecessary cooling through components, etc.
